SRV100 series release valve
Product overview The SRV100 series is a spring-loaded release valve designed to protect the gas distribution system from overpressure damage. At the same time, it can also play a protective role when the regulator is not strictly closed leading to failure. Suitable for non-corrosive gas after purification treatment. The release valve is compact in size and easy to install on the downstream pipe of the regulator system. Product characteristics ◆ Simple structure, compact size ◆ Precise pressure regulation ◆ Large circulation capacity ◆ Easy maintenance
View Details
RS-HTC280 electric heater
Product overview RS-HTC280 is the electric heater of the conductor, whose function is to heat the gas entering the conductor to avoid the problem of condensation, liquefaction, icing and other problems caused by the sharp reduction of temperature caused by gas heat absorption when there is a large pressure drop. Suitable for small flow drive heating. Product characteristics ◆ Product model: RS-HTC280 ◆ Heating medium: natural gas ◆ Maximum import pressure: 16.0MPa ◆ Rated voltage: 220V AC ◆ Rated power: 280W ◆ Ambient temperature: -40℃~+60℃ ◆ Maximum surface temperature: 90℃ ◆ Relative humidity: 25-95% (RH) ◆ Maximum allowable intake temperature: 60℃ ◆ Explosion-proof grade: Ex d II C T4 Gb ◆ Explosion-proof Certificate number: CNEx20.5170X ◆3C Certificate number: 2022312312000154 ◆ Scope of application: small flow gas heating ◆ Control output: Relay output AC250V 3A (resistive load)
View Details
Cyclone separator
Product overview Mainly used in the need for efficient removal of solid and liquid particles, especially for the removal of very large particles and water Technical characteristics
View Details
Cyclone separator
Product overview Mainly used in the need for efficient removal of solid and liquid particles, especially for the removal of very large particles and water Technical characteristics
View Details
Multi-element filter (separator)
Product overview Pressure regulating measuring station: remove liquid hydrocarbon, moisture, sand and pipe scale Install before the gas storage tank to prevent particles and moisture from entering It is installed at the suction end of the compressor to prevent particles and moisture in the air stream from wearing the equipment Remove particulate matter and moisture from gas handling equipment to prevent contamination of process equipment and catalyst poisoning Installed downstream of mixers such as amines, glycols, potassium and absorption oils for recycling to reduce dissolution losses Technical characteristics
View Details
Open the blind plate quickly
Product overview In pressure vessels, pressure pipelines and other supporting equipment, quick opening blind plate is a common quick opening or closing device. In the natural gas industry, the quick-opening blind plate is often used in equipment that needs to be opened and closed at irregular intervals, such as gas filters, gas filter separators, and receiving cylinder devices. Technical characteristics
View Details
Heat exchanger
Product overview A heat exchange device used to transfer part of the heat from a hot fluid to a cold fluid so that the fluid temperature meets the requirements of the process flow. The company's products according to the product use of different occasions, design a variety of structures of heat exchangers. Air temperature heat exchangers are often used for liquid liquefied petroleum gas and LNG vaporization into gas. The heat exchange of the gas in the pressure regulator makes the natural gas reach the required temperature, and prevents the decrease of the gas temperature caused by the gas pressure drop from affecting the normal operation of the downstream equipment. Heat exchangers are usually suitable for the following media: air, hot water, steam, thermal oil or electric heating, and can also be specially designed according to user requirements.
View Details
RCS8000 Remote pressure/flow control system
Product overview RCS8000 remote pressure/flow control system is based on the self-operated regulator with a controller, using a multistage controller, and adding the pressure and flow detection device in and out of the station. Its function is to achieve remote pressure, flow control and other functions, to achieve remote online monitoring and management of transmission and distribution system. At the same time, the RCS8000 system can also realize the control and management of automatic valves such as electric regulating valves. Product characteristics ◆ Flexible and diverse control functions ◆ Bus control, online monitoring function ◆ Can be operated remotely and visualized ◆ Strong scalability ◆ Can be integrated with the whole station control system ◆ High reliability and precision ◆ Easy to maintain
View Details
Receiving barrel
Product overview The receiving and serving barrel of the pig is an important process device of the pipe cleaning equipment, which is installed at both ends of the pipeline for launching and receiving the pig. It is mainly composed of quick-opening blind plate, cylinder, reducing tube, saddle support and other parts. Technical characteristics
View Details
1 2 3
Terrence always prioritizes the layout of our service network to improve the overall quality of service.
Our products are guaranteed to provide full life cycle service.

24-hour customer service hotline: 400-161-0500

Add: No.22 Yanhe Middle Road, Xinbei District, Changzhou City, Jiangsu Province

Tel: 0519-68951000

Fax: 0519-68951800

E-mail: terrencemarket@terrence.com.cn

Website: http://www.terrence.com.cn

Official wechat
Official website
Copyright © Terrence Energy Co., LTD
Designed by: www.zzwcn.cn
arrow-down-circle